Self Priming Return Stainless Steel Sanitary Pump DN25 - DN100 With Motor
Product description:
Self-priming pump is specially designed to deal with the suction material below the pump inlet level and the fluid material conveying with a part of gas. The self-priming pump's self-priming pump shell, self-priming pump cover and impeller are all made of high-quality stainless steel 304 or 316L. Motor with stainless steel cover. Inner surface mirror polishing roughness ra0.28um. Outer cover wire drawing matte finish. Fully comply with GMP requirements.
Self-priming pump is mainly used for self-priming type and liquid transport containing part of gas in pharmaceutical, wine, food, chemical, beverage and other industries.
· self-priming pump material: 304 or 316L (optional)
· working temperature of self-priming pump: -10℃-110℃ (sterilization temperature: 140℃)
· determine whether motor explosion protection is required for the working environment and medium of self-priming pump.
· sealing materials of self-priming pump: silicone rubber, fluorine rubber, epdm, ptfe, butylene.
· inlet and outlet connection mode of self-priming pump: clamp quick installation, DIN standard connection, flange, welding and other options.
| Specifications |
Power(KW) |
Full load current(A) |
Voltage(V) |
Import caliber |
Export caliber |
| DN25 |
1.1 |
2.6 |
380 |
DN25,φ32 |
DN25,φ32 |
| DN32 |
2.2 |
4.9 |
380 |
DN32,φ38 |
DN32,φ38 |
| DN50 |
4 |
8.1 |
380 |
DN50,φ51 |
DN50,φ51 |
| DN65 |
7.5 |
15 |
380 |
DN65,φ63 |
DN65,φ63 |
| DN80 |
11 |
22 |
380 |
DN80,φ76 |
DN80,φ76 |
| DN100 |
15 |
29 |
380 |
DN100,φ102 |
DN100,φ102 |
Working principle:
Self-priming pump is to be able to absorb mixed with air or foam of the liquid, even in the intermittent only air, so self-priming. The self-priming pump has good performance, reasonable structure, small volume and reliable use. Self-priming pump is applied to absorb materials in the tank with the liquid level lower than the pump, or in the CIP cleaning system, as a cleaning fluid return pump.
Self-priming pump structure introduction:
Self-priming pump is a single-stage self-priming positive displacement pump, which is composed of cover, impeller, pump body and motor. The impeller is shaped like star radiation, and the cover of the pump body constitutes the inner cavity of the pump. When the impeller rotates in the inner cavity of the pump, the volume of the impeller spokes and the inner cavity increases gradually from the suction mouth to the discharge outlet, and the volume distance of the composition shrinks gradually. Therefore, the liquid contained in the spokes of the impeller can be converted into reciprocating action of suction and drainage, forming a certain self-suction capacity.
Technical parameters:
· material: 304 or 316L (optional)
· operating temperature: -10℃-110℃ (sterilization temperature: 140℃)
· determine whether motor explosion protection is required for the working environment and medium.
· sealing materials: silicone rubber, fluorine rubber, epdm, ptfe, butylene.
· connection mode of import and export: quick installation of clamp, DIN standard connection, flange, welding, etc.
